Advertisement
Quick Links
Advertisement
Related Manuals for Navilock u-blox 8 NEO-M8U
Summary of Contents for Navilock u-blox 8 NEO-M8U
- Page 1 NL-82022MP u-blox NEO-M8U multi GNSS UDR MD6 serial receiver 5 m operation manual (62755)
- Page 2 At the next trip meeting the above criteria it will be automatically recalibrated. 1.1. Contents* 1 x Navilock NL-82022MP 1 x 8 cm CD ROM including operation manual * Before using the device, please make sure that all the parts are included in the package. If any...
- Page 3 Important health and safety information • When using this product, take the following precautions in order to avoid possible damages and legal consequences. Always follow all safety and operation manuals exactly and keep them for future reference. Observe all warnings in the operation manual and on the product. In order to avoid injuries, electrocution, fire and damages to the product, observe the following precautions: •...
- Page 4 2. Starting operation Assembly 2.1. The NL-82022MP must be firmly and unchangeably connected to the chassis of the vehicle for reliable UDR operation. A temporary use in a vehicle will lead to a calibration described in the introduction. Microsoft Windows with adapter cable to USB A61264 2.2.
- Page 5 3. LED indicator This receiver dos not have a LED indicator. 4. Application environment The NL-82022MP can be used as a USB GNSS receiver under Windows 7/8.1/10. 5. Functional test and GNSS system selection with u-center 8.24 in Windows 5.1. Load the u-center software from: https://www.u-blox.com/sites/default/files/ublox-GNSS_u- center_windows_v8.24.zip.
- Page 6 5.2. GNSS selection To select which GNSS you want to use, proceed as follows. View \ Configuration View You can select your GNSS system or your combination of several systems on the right side. The following combinations available: RTCM GNSS SBAS Galileo GLONASS...
- Page 7 6. EGNOS configuration with u-center 8.24 NL-82022MP uses EGNOS as default. In the configuration menu you can check these options. For detailed information please use the documentation from u-blox https://www.u- blox.com/sites/default/files/u-center_UserGuide_%28UBX-13005250%29.pdf.
- Page 8 7. AssistNow configuration with u-center 8.24 The NL-82022MP supports AssistNow. AssistNow is a standard A-GNSS service, which increases the performance of the GNSS receiver by calculating a position almost immediately, even under difficult reception conditions. A-GNSS improves all GNSS capable applications, especially those that require a continuous state of readiness, for example applications for fleet management or GNSS capable hand-held devices, whose users would like to access local services immediately, independently of the reception conditions.
- Page 9 The Navilock repair center tries to be as obliging as possible, so please tell us the real reason for the defect. During the error analysis, we can generally detect if the cause for the defect was an external cause, water damage, fall, over-voltage or the wrong handling of the unit.
- Page 10 9. Specifications Chip set manufacturer/type u-blox NEO-M8U Channels: 72 channels Sensitivity -160 dBm Frequency: GPS: L1, 1575.4200 MHz BEIDOU COMPASS: B1, 1561.0980 MHz GALILEO: E1, 1575.4200 MHz GLONASS: G1, 1602.5625 ~ 1615.5000 MHz Target precisions: Position horizontal: GPS/SBAS/QZSS+GLONASS and TCXO 2.0 m CEP Time: 1 microsecond synchronized with GPS time Speed:...
-
Page 11: Warranty Period
Navilock. The brand Navilock is a registered trademark and may not be used without the written authorization of the trademark owner. In no case may it be altered or completed by additions. -
Page 12: Conformity Declaration
Conformity declaration Please download the Declaration of Conformity from http://www.navilock.de/support/ in the conformity area. WEEE note The WEEE (Waste Electrical and Electronic Equipment) directive, which came into force on 13 February 2003, lead to a comprehensive change in the disposal of used electric products. It is the main purpose of this directive to avoid electric waste products (WEEE), while simultaneously promoting the re-usage, recycling and other forms of reconditioning in order to reduce the amount of waste.