Related Manuals for Navilock NL-82012U
Summary of Contents for Navilock NL-82012U
- Page 1 NL-82012U u-blox NEO-M8U multi GNSS UDR USB receiver 4.50 m operation manual (62758)
- Page 2 These include speed, acceleration, direction and inclination. From this data, the NL-82012U acquires position data that complements the current GNSS position data. They allow reliable position determination even when the GNSS signal is interrupted in the case of four-wheeled vehicles.
- Page 3 Important health and safety information • When using this product, take the following precautions in order to avoid possible damages and legal consequences. Always follow all safety and operation manuals exactly and keep them for future reference. Observe all warnings in the operation manual and on the product. In order to avoid injuries, electrocution, fire and damages to the product, observe the following precautions: •...
-
Page 4: Microsoft Windows
2.2 Microsoft Windows Plug the USB cable in a free USB port on your notebook etc. The NL-82012U will be recognized by your Windows operating system, which will attempt to install a driver. Abort this process, and load the driver from u-blox https://www.u-... -
Page 5: Led Indicator
If no bars are displayed, please change your position. The NL-82012U cannot receive in a closed building. If the blue bars are displayed, the receiver is still acquiring the data and verifying the receipt data. - Page 6 5.2. GNSS selection To select which GNSS you want to use, proceed as follows. View \ Configuration View You can select your GNSS system or your combination of several systems on the right side. The following combinations available: RTCM GNSS SBAS Galileo GLONASS...
- Page 7 6. EGNOS configuration with u-center 8.24 NL-82012U uses EGNOS as default. In the configuration menu you can check these options. For detailed information please use the documentation from u-blox https://www.u- blox.com/sites/default/files/u-center_UserGuide_%28UBX-13005250%29.pdf.
- Page 8 7. AssistNow configuration with u-center 8.24 The NL-82012U supports AssistNow. AssistNow is a standard A-GNSS service, which increases the performance of the GNSS receiver by calculating a position almost immediately, even under difficult reception conditions. A-GNSS improves all GNSS capable applications, especially those that require a continuous state of readiness, for example applications for fleet management or GNSS capable hand-held devices, whose users would like to access local services immediately, independently of the reception conditions.
- Page 9 Please check http://msdn2.microsoft.com/en-us/library/Aa969329.aspx. 8.4. The NL-82012U came in touch with jet water (water jet from a shower head or strong rain when it was mounted on a car roof). Do not connect the receiver with the notebook etc. under any circumstances, because it can otherwise be completely and irreparably destroyed.
- Page 10 9. Specifications Chip set manufacturer/type u-blox NEO-M8U Channels: 72 channels Sensitivity -160 dBm Frequency: GPS: L1, 1575.4200 MHz BEIDOU COMPASS: B1, 1561.0980 MHz GALILEO: E1, 1575.4200 MHz GLONASS: G1, 1602.5625 ~ 1615.5000 MHz Target precisions: Position horizontal: GPS/SBAS/QZSS+GLONASS and TCXO 2.0 m CEP Time: 1 microsecond synchronized with GPS time Speed:...
-
Page 11: Warranty Period
Navilock. The brand Navilock is a registered trademark and may not be used without the written authorization of the trademark owner. In no case may it be altered or completed by additions. -
Page 12: Conformity Declaration
Conformity declaration Please download the Declaration of Conformity from http://www.navilock.de/support/ in the conformity area. WEEE note The WEEE (Waste Electrical and Electronic Equipment) directive, which came into force on 13 February 2003, lead to a comprehensive change in the disposal of used electric products. It is the main purpose of this directive to avoid electric waste products (WEEE), while simultaneously promoting the re-usage, recycling and other forms of reconditioning in order to reduce the amount of waste.