Advertisement
Quick Links
Advertisement
Related Manuals for Navilock NL-8222MP
Summary of Contents for Navilock NL-8222MP
- Page 1 NL-8222MP u-blox 8 multi GNSS serial MD6 marine receiver 10.00 m Operation manual (62530)
- Page 2 1. Introduction The NL-8222MP is a serial GNSS receiver with an internal antenna and a u-blox 8 multi GNSS chipset. The serial port enables the connection with a notebook, UMPC, tablet / car PC.The flanged thread enables safe and waterproof attachment e.g. on the vehicle roof or on superstructures.
- Page 3 Microsoft Windows with adapter cable to USB A61264 2.1. Plug the USB cable in a free USB port on your notebook etc. The NL-8222MP will be recognized by your Windows operating system, which will attempt to install a driver. Abort this process, and start “...
- Page 4 The green bars at the bottom of the picture show the reception quality at your position. If no bars are displayed, please change your position. The NL-8222MP cannot receive anything in a closed building. If the blue bars are displayed, the receiver is still acquiring the data and verifying the receipt data.
- Page 5 You can select your GNSS system or your combination of several systems on the right side. The following combinations are possible: RTCM GNSS SBAS Galileo GLONASS BeiDou QZSS EGNOS WAAS MSAS GAGAN SDCM SNAS (RUS)* (EU)* (USA) (RUS) (CHN) (EU) (USA) (IND) (CHN)
- Page 6 The call-up and data transmission functions can be found in the menu bar of the u-center. Click on the AGNSS function in the menu bar to update AssistNow and to load the NL-8222MP.
- Page 7 8.2 You still don’t get a satfix. The NL-8222MP needs up to 20 minutes for its first satfix on another continent. To get a satfix the view to the sky must be unobstructed. Move the...
- Page 8 The Navilock repair center tries to be as obliging as possible, so please tell us the real reason for the defect. During the error analysis, we can generally detect if the cause for the defect was an external cause, water damage, fall, over-voltage or the wrong handling of the unit.
- Page 9 Before visiting your dealer, please contact the Navilock support center. They will try to help you quickly and without further ado, so that the circumstances of an exchange, which might in any case be unnecessary, are avoided. In this case, please write down a detailed description of the error, add this information to your end device and the software used in this device, as well as the operation environment (operating system, service pack version, CPU type, storage size, hard disk drive and interface etc.), and...
- Page 10 9. Specifications Chip set manufacturer/type u-blox 8 multi GNSS Channels: 72 channels Sensitivity -167 dBm Frequency: GPS: L1, 1575.4200 MHz BEIDOU COMPASS: B1, 1561.0980 MHz GALILEO: E1, 1575.4200 MHz GLONASS: G1, 1602.5625 ~ 1615.5000 MHz Target precisions: Position horizontal: GPS/SBAS/QZSS+GLONASS: 2.0 m CEP Time: 1 microsecond synchronized with GPS time Speed:...
- Page 11 Navilock. The brand Navilock is a registered trademark and may not be used without the written authorization of the trademark owner. In no case may it be altered or completed by additions.
- Page 12 Conformity declaration Please download the Declaration of Conformity from http://www.navilock.de/support/ in the conformity area. WEEE note The WEEE (Waste Electrical and Electronic Equipment) directive, which came into force on 13 February 2003, lead to a comprehensive change in the disposal of used electric products. It is the main purpose of this directive to avoid electric waste products (WEEE), while simultaneously promoting the re-usage, recycling and other forms of reconditioning in order to reduce the amount of waste.