Download
Share
Print this page
Navilock NL-8001UOTG Operation Manual
  1. Manuals
  2. Brands
  3. Navilock Manuals
  4. Receiver
  5. NL-8001UOTG
  6. Operation manual

Navilock NL-8001UOTG Operation Manual

U-blox 8 multi gnss micro usb b otg receiver 1.50 m
Hide thumbs

Advertisement

Quick Links

Download this manual
NL-8001UOTG u-blox 8 multi GNSS micro USB B OTG receiver 1.50 m
Operation manual (62872)

Advertisement

loading

Related Manuals for Navilock NL-8001UOTG

Summary of Contents for Navilock NL-8001UOTG

  • Page 1 NL-8001UOTG u-blox 8 multi GNSS micro USB B OTG receiver 1.50 m Operation manual (62872)
  • Page 2 1. Introduction The NL-8001UOTG is a USB GNSS receiver with an internal antenna and a u-blox 8 multi GNSS chipset. The USB port enables the connection with a notebook, UMPC, tablet / car PC. Thanks to its compact design and its high sensitive chipset, it is the ideal companion at work and at leisure.
  • Page 3 Microsoft Windows 2.1. Plug the USB cable in a free USB port on your notebook etc. The NL-8001UOTG will be recognized by your Windows operating system, which will attempt to install a driver. Abort this process, and start “ u-center 8.xx Installer.exe ” from the CD-ROM, or download the driver from the Navilock website.
  • Page 4 After starting the u-center software, check the functionality of your NL-8001U. 1. Selecting the COM port 2. Selecting the baud rate 3. Downloading Assist GNSS and updating the receiver (only single GNSS) 4. Visual display of the NMEA data 5. Configuration manager 6.
  • Page 5 You can select your GNSS system or your combination of several systems on the right side. The following combinations are possible: RTCM GNSS SBAS Galileo GLONASS BeiDou QZSS EGNOS WAAS MSAS GAGAN SDCM SNAS (EU)* (USA) (RUS) (CHN) (EU) (USA) (IND) (RUS)* (CHN)
  • Page 6 6. EGNOS configuration with u-center 8.xx NL-8001UOTG use EGNOS as default. In the configuration menu you can check these options. For detailed information please use the documentation from u-blox http://www.u- blox.com/images/downloads/Product_Docs/u-Center_User_Guide_(UBX-13005250).pdf. 7. AssistNow configuration with u-center 8.xx The NL-8001UOTG supports AssistNow.
  • Page 7 If this other USB device works fine, please contact the support center. 8.2 You still don’t get a satfix. The NL-8001UOTG needs up to 20 minutes for its first satfix on another continent. To get a satfix the view to the sky must be unobstructed. Move the...
  • Page 8 The Navilock repair center tries to be as obliging as possible, so please tell us the real reason for the defect. During the error analysis, we can generally detect if the cause for the defect was an external cause, water damage, fall, over-voltage or the wrong handling of the unit.
  • Page 9 9. Specifications Chip set manufacturer/type u-blox 8 multi GNSS Channels: 72 channels Sensitivity -167 dBm Frequency: GPS: L1, 1575.4200 MHz BEIDOU COMPASS: B1, 1561.0980 MHz GALILEO: E1, 1575.4200 MHz GLONASS: G1, 1602.5625 ~ 1615.5000 MHz Target precisions: Position horizontal: GPS/SBAS/QZSS+GLONASS and TCXO 2.0 m CEP Time: 1 microsecond synchronized with GPS time Speed:...
  • Page 10 Navilock. The brand Navilock is a registered trademark and may not be used without the written authorization of the trademark owner. In no case may it be altered or completed by additions.

  • Page 11: Conformity Declaration

    Conformity declaration Please download the Declaration of Conformity from http://www.navilock.de/support/ in the conformity area. WEEE note The WEEE (Waste Electrical and Electronic Equipment) directive, which came into force on 13 February 2003, lead to a comprehensive change in the disposal of used electric products. It is the main purpose of this directive to avoid electric waste products (WEEE), while simultaneously promoting the re-usage, recycling and other forms of reconditioning in order to reduce the amount of waste.