Cannot Print A Fax/"Fax Received. Saved In Memory." Appears - Canon TR7600 Series Online Manual

Cannot Print a Fax/"Fax received. Saved in memory." Appears

Make sure there is enough ink left to print.
Check1
• If there is not enough ink left to print, received faxes will be stored in the printer's memory without being
printed (Memory Reception). Printing starts automatically after replacing the ink tank.
Document Stored in Printer's Memory
• You can also set to print received faxes even when the ink level is low.
Select FAX settings > Auto print settings > Print when out of ink and then select Print.
However, if you run out of ink while printing a fax with this setting, the fax content will be output as a blank
page from the middle, and the fax content will be erased from the printer's memory as printed.
Check the operation panel is open.
Check2
If the operation panel is closed, received faxes will be stored in the printer's memory without being printed
(Memory Reception). Open the operation panel, and then select OK.
Is a different size of paper from that specified by Page size in Fax paper
Check3
settings loaded?
If a different size of paper from that specified by Page size is loaded for printing faxes, the received faxes will not
be printed and will be stored in the printer's memory (Memory Reception). Load the same size of paper as that
specified by Page size, then select OK.
Is paper loaded?
Check4
If paper is not loaded, received faxes will be stored in the printer's memory without being printed (Memory
Reception). Select FAX, Load paper, and then select OK.
380