Table of Contents
Advertisement
Engine Oil
Checking & Adding Oil
RIGHT SIDE
(1)
(1) oil filler cap/dipstick
(2) upper level mark
(3) lower level mark
1.
Park your motorcycle on a firm, level
surface.
2.
Clean around the oil filler cap/dipstick ( )
and nearby surfaces.
62
Servicing Your Honda
3.
Start the engine and let it idle for 3-5
minutes. Stop the engine. Wait 2-3 minutes.
4.
Unscrew and remove the oil filler cap/
dipstick. Wipe it clean.
5.
Hold the motorcycle upright.
6.
Insert the oil filler cap/dipstick until it seats,
but do not screw it in.
7.
Remove the oil filler cap/dipstick and check
the oil level.
If the oil is at or near the upper level mark
( ), you do not have to add oil.
(2)
If the oil is below or near the lower level
mark ( ), add the recommended oil until
(3)
it reaches the upper level mark. (Do not
overfill.)
8.
Insert the oil filler cap/dipstick and screw it
in tightly.
9.
Check for oil leaks.
1
2
3
Advertisement
Chapters
Table of Contents
