Optional Accessories; Transport And Frost Protection - Siemens WT47U640ES Installation And Operating Instructions Manual

Table of Contents

Advertisement

Installation and connection
en
Pull the filter out of the lock-in slot
8.
and place it into the recess in the top
of the condensation container.
Slide in the condensation container
9.
until it clicks into place.
The condensation is now discharged via
the drain hose into the waste-water
system or into a wash basin.
If you want to change the
Note:
condensation drain back to the
condensation container, carry out all
these steps in reverse order.
16

Optional accessories

Order optional accessories
after-sales service:
Platform:
For easier loading and unloading,
raise your dryer with a platform.
Transport laundry using the clothes
basket integrated into the platform
drawer.
Order number: WZ20505.

Transport and frost protection

Empty the condensate container.
1.
Select any programme using
2.
the programme selector.
Press the Start button.
3.
Wait for 5 minutes.
4.
The condensation is drained.
Note:
Empty the condensate container
5.
again.
Switch off the dryer.
6.
Despite draining, there will
Note:
always be some residual water in
the dryer.
Caution!
Any residual water may leak out
and cause material damage.
Transport the dryer in an upright
position.
Caution!
The dryer contains coolant and may be
damaged.
Allow the dryer to rest for two hours
before initial use.
*
Depending on the model
*
from the

Advertisement

Table of Contents
loading

Table of Contents