Table of Contents
Advertisement
Getting Started
Setting up
Connections
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the telephone line jack until
you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
*1
adaptor.
R Use only the supplied telephone line cord.
*1
PNLV226BX: KX-TGH210BX/
KX-TGH220BX
PNLV226E: KX-TGH210UE/
KX-TGH220UE
3
4
5
1
2
8
TGH21x22xBX_UE_ver021.pdf
4
8
Battery installation
R USE ONLY rechargeable Ni-MH batteries
1
AAA (R03) size (
).
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
1
R Follow the directions on the display to set
up the unit.
Battery charging
Charge for about 7 hours.
R Confirm "Charging" is displayed (
R When the batteries are fully charged,
"Fully Charged" is displayed.
2014/07/31
15:43:45
,
).
1
).
1
Advertisement
Table of Contents
