SNOWJOE Sunjoe SPX9006-PRO-RM Operator's Manual
  1. Manuals
  2. Brands
  3. SNOWJOE Manuals
  4. Pressure Washer
  5. Sunjoe SPX9006-PRO-RM
  6. Operator's manual

SNOWJOE Sunjoe SPX9006-PRO-RM Operator's Manual

Commercial grade electric pressure washer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
A Division of Snow Joe
, LLC
®
© 2021 by Snow Joe
, LLC
®
All rights reserved. Original instructions.
COMMERCIAL GRADE ELECTRIC
PRESSURE WASHER
R
1300 PSI MAX* | 2 GPM MAX* | 13.5 AMP | ONBOARD REEL
Model SPX9006-PRO-RM
SAVE THESE INSTRUCTIONS
1
Form No. SJ-SPX9006-PRO-RM-880E-M-V1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sunjoe SPX9006-PRO-RM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SNOWJOE Sunjoe SPX9006-PRO-RM

Summary of Contents for SNOWJOE Sunjoe SPX9006-PRO-RM

  • Page 1 COMMERCIAL GRADE ELECTRIC PRESSURE WASHER 1300 PSI MAX* | 2 GPM MAX* | 13.5 AMP | ONBOARD REEL OPERATOR’S MANUAL Model SPX9006-PRO-RM A Division of Snow Joe , LLC ® Form No. SJ-SPX9006-PRO-RM-880E-M-V1 © 2021 by Snow Joe , LLC SAVE THESE INSTRUCTIONS ®...

  • Page 2: General Safety

    Snow Joe + Sun Joe customer service ® ® 1-866-SNOWJOE (1-866-766-9563). center at 1-866-SNOWJOE (1-866-766-9563). WARNING! When using the pressure washer, basic WARNING! Do not use this appliance without reading safety precautions should always be followed to reduce the this instruction manual.

  • Page 3: Electrical Safety

    ® ® Improper connection of the equipment- 1-866-SNOWJOE (1-866-766-9563). grounded conductor can result in a risk of electrocution. Check with a qualified electrician or service personnel if you are in • Keep the machine on a stable, flat surface during operation, handling, transportation, and storage.

  • Page 4: Risk Of Electrocution

    temperature inside the pump is over 140°F (65°C), and the 6. To prevent the appliance cord from disconnecting from the valve closes when the temperature is lowered down. extension cord during operation, make a knot with the two cords as shown in Table 1. 3.

  • Page 5: Product Description

    Product Description Purpose • This electric high pressure washer is intended for residential use. It is designed for medium-to-heavy duty cleaning jobs on boats, motorcycles, RV’s, ATV’s, trailers, decks, barbecues, siding, patio furniture, and more. Areas of application • Never use the machine in potentially explosive areas under any circumstances! •...

  • Page 6: Safety Symbols

    Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, and follow all instructions in the WARNING! Electrical shock hazard.
  • Page 7 Know Your Commercial Grade Pressure Washer Read the owner’s manual and safety rules carefully before operating the pressure washer. Compare the illustration below to the unit in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

  • Page 8: Technical Data

    + Sun Joe customer service center at ® ® 1-866-SNOWJOE (1-866-766-9563). NOTE: Do not discard the shipping carton and packaging material until you are ready to use your new electric pressure washer. The packaging is made of recyclable Oil inlet materials.
  • Page 9 Fig. 6 Fig. 3 measuring plug Water outlet Connecting hose NOTE: Be sure to retain the oil inlet nut in event that the 7. Connect the high-pressure hose to the trigger gun (Fig. 7). pressure washer needs to be transported. NOTE: Use the oil inlet nut when transporting the pressure Fig.

  • Page 10: Operation

    Fig. 8 Fig. 10 Water inlet 3. Make sure the unit is switched off before plugging the unit into the power outlet. 4. Check that the electrical supply voltage and frequency Garden hose (Volt/Hz) correspond to those specified on the rating plate. If the power supply is correct, you may now plug the pressure washer into the power outlet (Fig.

  • Page 11: Bypass Mode

    Using Nozzles 7. Press the ON/OFF switch on the ON(I) side to start the pressure washer (Fig. 13). Before beginning any cleaning task, determine the best nozzle for the job. Each of the nozzles has a different spray pattern. Fig. 13 The nozzle patterns are 40˚...

  • Page 12: Working With Detergents

    To disconnect a nozzle from the spray wand once the cleaning CAUTION! Always test the detergent in an job is complete: inconspicuous area before use. 1. Turn off the pressure washer and shut off the water supply. 4. Apply detergent from the bottom to the top of the dry Pull the trigger to release water pressure.

  • Page 13: Shutting Down

    • Ammonia products Fig. 19 • Acid-based products These chemicals will harm the unit and will damage the cleaning surface. Shutting down 1. Make sure the pressure adjustable valve is closed. Turn the switch to the OFF (0) position and unplug the power cord from the outlet.

  • Page 14: Change Pump Oil

    Maintenance Fig. 21 CAUTION! Before working on the pressure washer, disconnect the plug from the power supply socket. Change Pump Oil The pump was filled with standard 5W-40 synthetic oil at the Hand crank factory. Check the table below for compatible pump oil and schedule of oil changes.

  • Page 15: Recycling The Pressure Washer

    Fig. 26 Fig. 23 Oil measuring plug Filter MIN. oil level Oil inlet 2. Clean the nozzle with the needle clean-out tool provided (Fig. 27). Remove the spray wand from the gun; remove any dirt from the nozzle hole and rinse. 5.

  • Page 16: Service & Support

    + Sun Joe customer service center at ® ® 1-866-SNOWJOE (1-866-766-9563). Model + Serial Numbers When contacting the company, reordering parts, or arranging service from an authorized dealer, you will need to provide the model and serial numbers, which can be found on the decal located on the housing of the unit.

  • Page 17: Troubleshooting

    • Pump seals worn out. • Please call the Snow Joe + Sun Joe customer ® ® service center at 1-866-SNOWJOE (1-866-766-9563) for assistance. Machine stops • Fuse has blown. • Replace fuse. Switch off other machines using the same circuit.
  • Page 18 NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ® service center at 1-866-SNOWJOE (1-866-766-9563).
  • Page 19 To obtain a replacement part or product, please visit Some states do not allow exclusions of incidental or consequential snowjoe.com/help or email us at help@snowjoe.com for damages so the above exclusions may not apply in all states. This instructions. Please be sure to register your unit beforehand warranty may give you specific legal rights in your state.
  • Page 20 sunjoe.com...

Table of Contents