Remote Control; Operating Instructions; Unit Diagram - Uni-P Dry Renegade 1400X Installation, Operation & Service Instructions

Uni-P Renegade1400X AIR MOVERS

Operating Instructions

1. Start the machine
• Press the power key to turn the dehumidfier on.
2. Adjust the settings
• Use the up and down arrow keys to adjust your desired setpoint
(typically 50-55%)
3. Stop the machine
• Press the power button again and the dehumidifier will stop. Note that the fan will
continue to operate for 1 minute after the unit has shut off.
DO NOT DISCONNECT THE POWER CORD TO FORCE THE UNIT TO STOP.
4. Water Drainage
• The Uni-P Renegade 140X has an integrated condensate pump. During normal
operation, the 140X will automatically drain as required.
• If you would like to store or move your unit, press the drain button to drain water from
the pump reservoir. The drain will operate for 15 seconds each time the button is
pushed. It may be necessary to push the button more than once.
Tel: 888-994-0895
Installation, Operation & Service Instructions
7
Uni-P Renegade1400X AIR MOVERS

Unit Diagram

Pre-Filter
Control Panel
8
Installation, Operation & Service Instructions
Side Panel
Remote
Control
Front
View
Drain Hose
Connection
Power Cord
Back
View
Tel: 888-994-0895