Related Manuals for Uni-P Dry H20 200C
Summary of Contents for Uni-P Dry H20 200C
- Page 1 Uni-P H20 200C Dehumdifiers Installation, Operation & Service Instructions READ AND SAVE THESE INSTRUCTIONS Add: 4240 Latham Street, Suite D, Riverside, CA 92501 Tel: 888-990-7469 E-mail: sales@unipdry.com...
-
Page 2: Table Of Contents
Uni-P H20 200C DEHUMIDIFIER Uni-P H20 200C DEHUMIDIFIER 1.Important Introduce The Unip H20 200C is a split system dehumidifier with sensible cooling Important Notes that is integrated into the heating and cooling system to provide the ultimate in comfort, health and property protection through: •... -
Page 3: Warranty Registration
Outlet Requirement: " 3 Prong, GFCI Length the necessary information. 109 lbs Weight 60 dBa Sound Level: Model Number: Uni-P H20 200C Hard-Wired Power Cord: Serial Number: Date of Purchase: Dimensions . 25 " Width For additional questions concerning your dehumidifier: . -
Page 4: Installation
You can order the that you do not hang from ends or sides. condensate pump kit from Uni-P Dry. Make sure that you place a drain pan beneath the dehumidifier if it is During the installation of the drain hose ensure that the base of the device is at least 6”... - Page 5 Installation, Operation & Service Instructions Installation, Operation & Service Instructions Uni-P H20 200C DEHUMIDIFIER Uni-P H20 200C DEHUMIDIFIER 7.5 The P/N 4028607 Supply Duct Kit • DO NOT use the condensing unit as a bench or table • Do not place the condensing unit where the sound and vibration caused by running the unit will a...
- Page 6 Installation, Operation & Service Instructions Installation, Operation & Service Instructions Uni-P H20 200C DEHUMIDIFIER Uni-P H20 200C DEHUMIDIFIER Warning: Note: In a case where there is no pressure in the Uni-P H2O 200CC dehumidifier when the first The POE (Polyester) oils used by the HFC-410A refrigerant system absorb moisture quickly. It is thus;...
- Page 7 Installation, Operation & Service Instructions Installation, Operation & Service Instructions Uni-P H20 200C DEHUMIDIFIER Uni-P H20 200C DEHUMIDIFIER Leak Test the Dehumidifier and the Line Set Ensure that all valves present of the manifold gage on the outdoor unit are closed. Connect an HFC-410A refrigerant cylinder to the center port present on the manifold gage set.
- Page 8 Installation, Operation & Service Instructions Installation, Operation & Service Instructions Uni-P H20 200C DEHUMIDIFIER Uni-P H20 200C DEHUMIDIFIER • Evacuate the dehumidifier and line set for a minimum of fifteen minutes then check if the The On-Board De-humidistat micron gauge reads below five hundred microns.
-
Page 9: Maintenance
Installation, Operation & Service Instructions Installation, Operation & Service Instructions Uni-P H20 200C DEHUMIDIFIER Uni-P H20 200C DEHUMIDIFIER Maintenance Dehumidifier Spare Parts WARNING: You should never operate the Uni-P H2O 200CC dehumidifier with a less Display/Control Fan Components effective filter or without a filter. In any case, the heat exchange coils that are in the unit... - Page 10 Installation, Operation & Service Instructions Installation, Operation & Service Instructions Uni-P H20 200C DEHUMIDIFIER Uni-P H20 200C DEHUMIDIFIER Limited Warranty Warranty Exclusions 5 Years (From Date of Purchase): Unipdry warrants the dehumidifier will operate free of defects in workmanship and materials.At its discretion, Unipdry will repair or replace any malfunctioning components,...