Timer Feature (Kitchen Timer/Stand Time/Delay Start) - Panasonic NN-SD291W Operating Instructions Manual

IP4924_39X05CP_Eng_00_140417:IP3677_38Q04CP_00_110608.qxd 2014-4-17 10:11 Page 20
this feature allows you to program the oven as a kitchen
timer. It can also be used to program a standing time after
cooking is completed and/or to program a delay start.
To Use as a Kitchen Timer:
Example: To count down 5 minutes.
1.
2.
time Dial
Rotate
3.
To Set Stand Time:
Example: To cook at P6 power for 3 minutes, with stand
time of 5 minutes.
1.
Press 5 times
2.
time Dial
Rotate
3.
4.
time Dial
Rotate to 5 minutes.
5.
Timer feature
• Press Timer/Clock once.
• Set time, using time Select Dial to 5
minutes.
• Press Start.
time will count down without oven
operating.
• enter the desired Power Level
(see page 13 for directions).
• Set cooking time, using time Select
Dial to 3 minutes.
• Press Timer/Clock once.
• Set stand time, using time Select
Dial.
• Press Start.
Cooking will start. after cooking,
stand time will count down without
oven operating.
CAUTION:
If oven lamp is lit while using the timer feature, the oven is
incorrectly programmed. Stop oven immediately and
re-read instructions.
To Set Delay Start:
Example: To delay the start of cooking for 5 minutes, and
cook at P6 power for 3 minutes.
1.
• Press Timer/Clock once.
2.
• Set delay time, using time Select Dial
time Dial
to 5 minutes.
Rotate
3.
• enter the desired Power Level
(see page 13 for directions).
Press 5 times
4.
• Set cooking time, using time Select
time Dial
Dial.
Rotate to 3 minutes.
5.
• Press Start.
Delay time will count down. then
cooking will start.
NOTE:
1. When each stage finishes, a two-beep signal sounds. at the
end of the program, the oven will beep five times.
2. If the oven door is opened during Stand time, Kitchen
timer or Delay time, the time on the display will continue to
count down.
3. Stand time and Delay start cannot be programmed before
any automatic Function. this is to prevent the starting tem-
perature of food from rising before defrosting or cooking
begins. a change in starting temperature could cause inac-
curate results.
4. the maximum programmable time of Standing time,
Kitchen time or Delay time is up to 90 minutes.
20