Table of Contents
Advertisement
Unscrew
and remove
2.
screws for the transit bolts with a
WAF 13 wrench.
2
Pull the power cord out of the
3.
holder.
Remove the four sleeves.
4.
all four
1
Installation and connection en
Put on the four cover caps.
5.
Press down on the four cover
6.
caps.
Removing the transport struts
Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Unscrew and remove the screws in
1.
the vertical transport struts using a
T20 screwdriver.
15
Advertisement
Table of Contents
