Sunbeam Urban Series User Manual page 11

Using your FoodSaver
How to Vacuum Package with FoodSaver
1. Place FoodSaver ®
dry surface and plug the supply cord
into a standard electrical outlet.
2. Place item(s) in bag, allowing at least
7.5cm of space between bag contents and
top of bag.
3. Open lid and place open end of bag into
the Vacuum Channel.
4. Close and lock lid by pushing the silver
arrows on each side of the lid until fully
closed.
Vacuum Packaging System continued
®
®
appliance on a flat,
Bags 5. Press On/Vac button.
6. After the sealing light has gone out, press
the 2 release buttons on either side of the
appliance to release the lid and remove bag.
Wait 20 seconds before vacuuming and / or
sealing again.
Note: Leave the lid in the unlocked position
when storing as this ensures the foam gasket
is not compressed for an extended time,
extending the life.
11