Using Your Foodsaver ® Urban - Sunbeam Urban Series User Manual

Using your FoodSaver
Packaging System Urban
How to make a Bag from a FoodSaver
1. Place FoodSaver
dry surface and plug the supply cord
into a standard electrical outlet.
2. Pull out enough material from your roll,
to hold item to be vacuum packaged
3. Cut to desired length, plus 7.5cm.
4. Open lid. The lid may be locked. To release
the lid press the release buttons on each
side of the lid.
5. Place one open end of the bag material
across the sealing strip and close lid.
(Do not place edge of bag into vacuum
channel when sealing bags)
10
® Roll
® appliance on a flat,
Vacuum
®
6. Lock lid by pushing the silver arrows on
each side of the lid until fully closed.
7. Press the seal button. When the seal
indicator light turns off, open the lid by
pressing the 2 release buttons on either
side of the appliance. Remove the bag.