Exploded View; Care And Maintenance - Twin-Star International 18II033FGL Manual

EXPLODED VIEW

Part Part Name
1 Flame Generator Drive Motor
2 Emberbed Circuit Board
3 Blue Flame Circuit Board
4 Flame Circuit Board
5 Flame Generator/ Spinner
6 Main Circuit Board
7 Heater/Blower Assembly
8 Control Panel Circuit Board
9 Control Panel Buttons
10 Emberbed with Log
11 Log Circuit Board
12 Remote Control
13 Thermostat Sensor
Note, the scale and size of your parts may be different depending on your exact model.

CARE AND MAINTENANCE

• The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and require no
further lubrication. However, we recommend periodic cleaning/vacuuming of the fan/heater.
• Clean the trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth.
DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based products
can be obtained at supermarkets or hardware stores.
• Make sure the unit is turned OFF and unplugged before cleaning the heater or fireplace.
A308
9
8
7
6
13
10
11
7
5
4
3
2
1
12
www.tsicustomerservice.com