ELECTRIC FIREPLACE INSERT
V E N T F R E E F I R E P L A C E W I T H H E A T E R
HOMEOWNERS OPERATING MANUAL
MODELS 18E05, 23E05, 28E05 & 33E05
PLEASE READ THIS MANUAL BEFORE INSTALLING
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY,
AN ELECTRIC SHOCK OR FIRE MAY RESULT CAUSING PROPERTY
DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS
AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
Thank you and congratulations on your purchase of a Twin-star fireplace.
Please read the Installation & Operating Instructions before using this appliance.
IMPORTANT: Read all instructions and warnings carefully before starting installation.
Failure to follow these instructions may result in a possible electric shock, fire hazard
and/or injury and will void the warranty.
Installation of Electric Fireplace Insert, should take 15 minutes. The only tool required is a
Phillips head screwdriver, not supplied with this unit.
Twin-Star International, Inc.
Delray Beach, FL 33483
In USA: 866-661-1218
In Canada: 866-374-9203
ELECTRIC FIREPLACE INSERTS
CONSUMER SAFETY INFORMATION
AND OPERATING THIS APPLIANCE
WARNING!!
Wood Fireplace Mantel
E-1
A T T E N T I O N
ALSO Requires-
Need help?
Do you have a question about the 18E05 and is the answer not in the manual?
Questions and answers
Where is the receiver for the remote on the fireplace? Also, I **** unable to find a replacement remote
The receiver for the remote on the Twin-Star International fireplace model 18E05 is a separate unit that looks like a short extension cord or surge protector. It must be plugged into an electrical outlet.
This answer is automatically generated
I have a Twin Starplace Model 33E05 I purchased at an estate sale. Is there a remote control I can purchase to use with this insert.
Yes, a remote control is available for the Twin-Star International Model 33E05 insert if the model number includes an "R" at the end.
This answer is automatically generated
I have a Twin Star Fireplace Insert Model 33E05 and the Power Switch is defective. How do I replace the switch?
The document does not provide specific instructions for replacing the power switch on a Twin-Star International Fireplace Insert Model 33E05. However, it states that any electrical repairs or rewiring should be carried out by a licensed electrician according to national and local codes. It also warns not to exceed specified electrical limits and to follow original wire routing and coding.
Therefore, to replace the power switch:
1. Turn off the power to the unit.
2. Do not attempt the repair yourself unless you are a licensed electrician.
3. Hire a qualified technician to perform the replacement in compliance with safety regulations.
This ensures safety and prevents voiding the warranty.
This answer is automatically generated
I have a Twin Star Fireplace Insert Model 23E05 and the Power Switch is defective. How do I replace the switch?
The manual does not provide specific instructions for replacing the power switch on the Twin-Star International Fireplace Insert Model 23E05. It states that any electrical repairs or rewiring should be done by a licensed electrician in accordance with national and local codes. It also warns to follow original wire routing, color coding, and securing locations when repairing or replacing electrical components.
This answer is automatically generated