Sound Settings - Subwoofer Level - Scania AUS4STD Manual

Note
Special characters can be selected by using the lower page selection button
(1/4, 2/4 etc.)
It also predicts the input and simplifies input by interpreting an "o", for
example, as an "ö" and "a" as "å" or "ä", depending on the input options
selected .
Use the icon to delete incorrect entries.
> A popup informs you that connection is in progress.
> If connection was successful, a green tick is displayed on the left of the WLAN
network connected. Otherwise, a popup appears, informing you that the
password was incorrect.
"Connection Details" submenu
This submenu shows the MAC address of the Head Unit and the IP address of the
connected network.
The "Connected IP address" information is only displayed if a network is connected.

Sound settings - Subwoofer level

· Press the SETUP
· Tap on the
Note
To change the settings you can proceed as follows:
· Tap on one of the screen buttons (
settings.
· Move the slider via the touch screen.
· Move the slider by rotating the right rotary encoder/push button .
· Use the Subwoofer level setting to modify the subwoofer level of the audio
source.
91
button.
icon.
/ ) to change the audio