Mini Bowl Assembly; Chef's Bowl Assembly - KitchenAid ARTISAN 5KFPM776 Operating Instructions And Recipes

Preparing the Food Processor for Use
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
2. Fit the disc over the metal pin on the
disc stem with the raised-blade side
up. The disc has a raised nub on the
top and grooves underneath to help
align it properly. Rotate the disc until it
falls fully onto the stem.

Mini Bowl Assembly

1. Place the mini bowl inside the work
bowl over the power shaft. Rotate the
mini bowl until it falls into place. When
properly seated in the work bowl, the
mini bowl cannot be rotated.
2. Fit the mini blade on the power shaft.
It may be necessary to rotate the blade
until it falls into place.The mini bowl can
also be placed in the chef's bowl in a
similar manner.
3. To remove the mini bowl after
processing, lift the bowl using the two
finger grips located along the top edge
of the bowl.
Chef's Bowl Assembly (5KFPM776)
Place the chef's bowl inside the work
bowl over the power shaft. Rotate the
chef's bowl until it falls into place. When
properly seated in the work bowl, the
chef's bowl cannot be rotated.
The chef's bowl can only be used with
the slicing and shredding discs – the
multipurpose blade cannot be used. To
remove the chef's bowl after processing,
lift the bowl using the two finger grips
located along the top edge of the bowl.
9
Continued on next page