Table of Contents
Advertisement
Connecting to an HDTV – Video Only
Sample HDTV
•
If your HDTV has an HDMI input, connect an HDMI cable to the HDMI connector as
shown. HDMI connection carries both video and audio signals.
•
If your HDTV has a DVI input, you can use an HDMI-to-DVI converter to connect to the
VIP2500 HDMI connector.
•
If your HDTV has component video, connect component video cables to the Y, Pb, and
Pr connectors as shown.
DVI and component video carry video signals only. To connect the audio, refer to the
following page. To connect to a home theater receiver, refer to "Connecting Audio to a
Home Theater Receiver – Audio Only. "
VIP2500 Series High-Definition U-verse Receiver Installation Manual
Component video
connection
Component
Video Input
Y
Pb
Pr
HDMI
connection
Either / or
HDMI
CABLE/
ANTENNA IN
7
Advertisement
Table of Contents
