Napoleon PRO825RSBIPSS-3 Manual page 16

16
CAUTION!
!
exist, do not use the gas grill. Have the part replaced by your Napoleon Grill dealer or qualified gas
EN
installer.
Aluminum Castings: Clean castings periodically with warm soapy water. Aluminum will not rust, but high
temperatures and weathering can cause oxidation to occur on aluminum surfaces. This appears as white
spots on the castings. To refinish these areas, clean first and sand lightly with fine sandpaper. Wipe the
surface to remove any residue and paint with high temperature barbecue paint. Protect surrounding areas
from over-spray. Follow the manufacture's directions for curing.
!
WARNING!
of your grill.
Lights: To replace the halogen bulb in your grill you must first remove the lens from the light housing. To
remove the lens from the housing, remove the Philips screw securing the housing in place. Snap the lens
out of the housing (including the metal bracket). Do not touch the halogen bulb with your bare hands.
The oil from your fingertips will reduce the life of the bulb. With gloved hands gently pull the old bulb
from the socket and replace with the new bulb. Reinstall the lens, by snapping it back into the housing
and bend the tabs on the front of the housing back in to position.
www.napoleon.com
N415-0537 JUN 24.19.indd 16
Check for abrasions, melting, cuts, and cracks in the hose. If any of these conditions
Always wear protective gloves when changing the halogen bulb in the internal lights
1
3
2
N415-0537 JUN 24.19
6/24/2019 12:46:21 PM