Connecting An Audio Cable - LG CRD-8360B Owner's Manual

Interface
connector
IDE Cable
Figure 9. Connecting the IDE Cable
to the Interface Connector

CONNECTING AN AUDIO CABLE

Pin assignment
The pin assignment of the
audio output connector is
as follows.
GND GND
R-Channel L-Channe
* Pin assignment of the audio cable
GND
L-Channel
Figure 10. Connecting an Audio Cable
to the Audio Output Connector
Disc Hooks
Pin 1
Red-edge
l
Audio
to Audio
Cable
Equipment
(sound card)
GND
R-Channel
Step 6. Connect the 40-pin IDE Cable to
the back of the CD-ROM Drive.
Please make sure that the red
edge of the IDE Cable is con-
nected to Pin 1 on the CD-ROM
Drive.
If you want to connect audio equipment
or a sound card to the CD-ROM drive,
use an audio cable to connect the drive
to the sound device.
Note: This CD-ROM Drive can be used
vertically.
• To use the drive vertically, open the
drawer and put a disc on to the 3 disc
hooks. Use only standard 12cm discs.
• Do not touch the unlabeled side of the
disc.
E-10