Assembly - Greenlee 43179 Limb-Lopper Operation, Service And Parts Instruction Manual

GREENLEE FAIRMONT
Assembly (cont'd)
Figure 19
Torquing Sequence
5
1
3
8
Needle Bearing Installation
Motor Body (See Figure 20)
1. Install a new bearing (2) with identification mark
facing up (readable from Surface A) into motor body
(1).
2. Press bearing into motor body until bearing cage is
.016 inch below Surface A.
3. Repeat procedure for the other bearing if it was
removed.
Motor Cap (See Figure 20)
1. Install a new bearing (5) with identification up
(readable from Surface B) into motor cap (4).
2. Press bearing into motor cap until bearing cage is
.047 inch below Surface B.
3. Repeat procedure for the other bearing if it was
removed.
Figure 20
Needle Bearing Installation
SURFACE B
MOTOR CAP
SURFACE A
MOTOR BODY
0-RING SEAL
Greenlee Fairmont Textron / Subsidiary of Textron Inc.
Pistol Grip Chain Saw
7
4
2
6
.047 BELOW
SURFACE B
NEEDLE BEARING
.016 BELOW
SURFACE A
27
4455 Boeing Drive, Rockford, IL 61109 815/397-7070