Contents Important safety instructions Hearing Safety General information 2 Your Bluetooth in-ear headphones What's in the box Other devices Overview of your Bluetooth wireless headset 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music...
1 Important General information safety To avoid damage or malfunction: instructions Caution Do not expose headphones to excessive heat Do not drop your headphones. Hearing Safety Headphones shall not be exposed to dripping or splashing. Do not allow your headphones to be submerged in water.
Bluetooth in-ear headphones Audio cable with USB plug Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips o ers, register your product at www.philips.com/welcome. With this Philips in-ear headphones, Quick start guide you can: •...
Overview of your Bluetooth wireless headset Microphone Multi-function buttons LED indicator (headset) Micro USB charging slot LED indicator (charging case)
The micro USB charging slot on the headphones and; • The charger/USB port of a computer. LED turns white during charging and turns o when the headphones in fully charged. Normally, a full charge takes 2 hours. Philips TAPN402...
4 Use your Manage your calls and headset music On/o Connect the headset to Button Task Operation your Bluetooth device On/o , Turn the Press and hold head- music/call for 3 seconds. phones on. control Turn on your mobile phone/ Bluetooth device.
Page 8
Other headphones indicator status Headphones status Indicator The headphones The blue LED are connected ashes for every to a Bluetooth 8 seconds. device, while the headphones in standby mode or while you are listening to music. The headphones The LED ashes are ready for blue and white pairing.
2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product to an o cial collection point or a Philips service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate...
However, there is no guarantee that Compliance with EMF interference will not occur in a particular installation. If this equipment does This product complies with all applica- cause harmful interference to radio or ble standards and regulations regarding television reception, which can be exposure to electromagnetic elds.
• On your Bluetooth device, delete • The Bluetooth device is out of range. “Philips SHB2505” from the Bluetooth Reduce the distance between your list. headset and Bluetooth device, or • Pair your headset (see ‘Pair the remove obstacles between them.
Page 13
‘Factory reset the headset’ on • If you are listening to music but sound page 9). only comes from one earpiece: • The other earpiece may be out of For further support, visit battery. For optimal performance, www.philips.com/support. charge both earpiece fully.
Page 14
ANATEL: www.anatel.gov.br Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its a liates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.