Get Started; Charge The Battery; Pair The Headphones With Your Mobile Phone - Philips Performance TAPN402 User Manual

3 Get started

Charge the battery

Note
 Before you use your headset for the rst time,
place the headsets in the charging case and
charge the battery for 3 hours for optimum
battery capacity and lifetime.
 Use only the original USB charging cable to
avoid any damage.
 Finish your call before charging the headset,
as connecting the headset for charging will
power the headset o .
Charging case
Connect the supplied USB charging
cable to:
• The micro USB charging slot on the
headphones and;
• The charger/USB port of a
computer.
LED turns white during charging and
turns o when the headphones in
fully charged.
Tip
 Normally, a full charge takes 2 hours.
Pair the headphones
with your mobile phone
Before you use the headphones with
your mobile phone for the rst time, pair
it with a mobile phone. A successful
pairing establishes a unique encrypted
link between the headphones and
mobile phone. The headphones store
the last 8 devices in the memory. If you
try to pair more than 8 devices, the
earliest paired device is replaced by the
new one.
Make sure that the headphones are
fully charged and turned o .
Press and hold
until the blue and white LED ashes
alternately.
Philips TAPN402
for 6 seconds