Simpson MS60763-S Instruction Manual page 8

WARNING: To reduce the risk of injury, read the pressure washer instruction manual and
the engine instruction manual before operating pressure washer.
Install the Handle
A
Place handle onto
frame, depress
the snap buttons, and
slide the handle assembly
onto the frame until snap
buttons snap into place.
IMPORTANT: Ethanol Shield
and prevent ethanol related problems in power equipment. Follow the instructions on the
container and add to the gasoline.
DANGER:
contains carbon monoxide, an odorless and deadly gas.
allow the high-pressure spray to come in contact with unprotected skin, eyes or with
any pets or animals. Serious injury will occur.
Connect Garden
1
Hose to Pump
Thread the garden
hose to the pump inlet.
See label #1 on unit.
Please contact us for further information at www.allpartsinc.com
QUICK SETUP GUIDE
Add/Check Oil
B
The engine is
shipped without
oil. Before starting engine,
add the oil provided.
Check oil level prior to
each use. Refer to Engine
Owner's Manual for
complete procedure.
(sold separately) is a fuel stabilizer that helps eliminate
TM
QUICK START GUIDE
Connect High
2
Pressure Hose to
Pump
Connect the high pressure
hose to the pump outlet.
See label #2 on unit.
8- ENG
Add Gasoline
C
In a well ventilated
outdoor area
add fresh, high quality,
unleaded gasoline with a
pump octane rating of 86
or higher. Do not overfill.
Wipe up spilled fuel before
starting the engine. Refer to
Engine Owner's Manual
for complete procedure.
Connect High
3
Pressure Hose to
Spray Gun
Thread the other end of
the high pressure hose
to the spray gun.