Package Contents; About Your Hardware - Watchguard XTM 2 Series Hardware Manual

Hardware Specifications

Package Contents

The package contains this Hardware Guide on a CD-ROM and:
XTM 2-Series appliance
Quick Start Guide
Hardware warranty card
AC adapter (12V/2A) with international plug kit
Power cable clip, to attach to the cable and connect to the the device. This decreases the tension on
the power cable.
4 rubber pads for the bottom of the device.
1 straight-through Ethernet cable
1 Wall mount plate (wireless models only)
Three antennas (wireless models only)

About Your Hardware

Hardware specifications
Power supply
Dimensions
Weight
Interface Specifications
Network
interfaces
I/O interfaces
2
XTM 2-Series
12V/2A
D = 156mm (6.13")
W = 163mm (7.4")
H = 32mm (1.25")
1.9 U.S. pounds
• 3x GbE Copper RJ45, 1000Base-T,
100Base-TX, or 10 Base-T (10/ 100/
1000Mbps)
• 3x 10/100 Mbps
• 2 USB
XTM 2-Series Wireless
12V/2A
D =203mm (8.0")
W = 273mm (10.75")
H = 32mm (1.25")
Antenna height = 127mm (5.0")
2.0 U.S. pounds