Table of Contents
Advertisement
Mini-ITX Mainboard Manual
Resume On RTC Alarm
When "Enabled", you can set the date and time at which the RTC (real-time clock)
alarm awakens the system from Suspend mode.
Options: Disabled (Default) / Enabled
RTC Alarm Date (Days)
You can choose which date the system will boot up.
RTC Alarm Time
You can choose the system boot up time, input hour, minute and second to specify.
Restore on AC Power Loss
This setting specifies how your system should behave after a power fail or interrupts
occurs. By choosing Disabled will leave the computer in the power off state.
Choosing Enabled will restore the system to the status before power failure or
interrupt occurs.
Options:
Power Off (Default) / Power ON / Last State
USB Configuration
This item shows the USB controller and using USB device information.
Advanced
USB Configuration
Module Version - 2.24.3-13.4
USB Devices Enabled:
Legacy USB Support
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
> USB Mass Storage Device Configuration
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
32
BIOS SETUP UTILITY
[Enabled]
[HiSpeed]
[Enabled]
Enables support for
legacy USB. AUTO
option disables
legacy support if
no USB devices are
connected.
Select Screen
Select Item
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Advertisement
Table of Contents
