Quick Start - Triax pcv10 Manual

Quick Start

Follow steps through to position your hardware and go for a run.
1
Push tab up through slot
in HRM Strap.
1
Remove the SDM Pod
from holder.
2
Press down tab until flush
2
Loosen shoe laces and slide
yellow clip up under laces.
4
3
Attach other side of HRM Strap around
chest. Position on rib cage just below
the breast plate. Should be worn
directly against skin and snug enough
to not slip down while running.
3
Secure the SDM Pod with black
strap. The SDM Pod should rest
just below where laces tie and
be secure enough to not move
while running.