Setting The Chronograph Auto-Lap - Triax pcv10 Manual

Setting the Chronograph Auto-Lap

The Chronograph contains an Auto-Lap feature. You can set a distance at which the watch will automatically mark a lap.
You cannot manually mark laps when Auto-Lap is activated. Follow steps
EXIT
4 SEC
Scroll to
CHRONOGRAPH
mode
Set speed unit
4
Press button to select
adjustable element.
Set heart rate Set max
unit heart rate
through
Set Auto-Lap Start Run
Set lap distance Press start / lap
(Example: 1 mile) button
Auto-Lap Auto-Lap
ON/OFF distance unit
to setup the Auto-Lap feature.
LAP 1 LAP 2
Auto-Lap Auto-Lap
Marked Marked
(1 mile) (1 mile)
SDM manual SDM auto
calibration calibration
see page 11 see page 10
Adjusting your Calibrating the
Offset SDM Pod