Care & Cleaning - Sunbeam MINI BARISTA EM4300K User Manual

Care & Cleaning
The espresso making process involves
extracting oils out of coffee grinds. Deposits
of grinds and oils build up over time affecting
the taste of the coffee and operation of the
espresso machine.
Purging water through the Group Head
and Steam Wand, before and after making
each coffee, is the easiest way to keep your
machine clean.
(See Operating Guide page 6-9)
Important: Below parts are
NOT DISHWASHER SAFE:
- Group Handle
- Drip Tray
- Tamper
- Water Reservoir
CAUTION: To prevent damage to the
STEAM
appliance do not use alkaline cleaning
INSERT
agents when cleaning the exterior. Use a
soft cloth and a mild detergent.
INSERT
Cleaning Tablets
Sunbeam Espresso Machine Cleaning Tablets
(EM0020) are available for purchase from
Sunbeam. Details are on the back page.
Cleaning Drip Tray
Empty the Drip Tray when required, if the red
Water Level Indicator appears through the
PLEASE EMPTY TRAY
Grill, empty the Drip Tray immediately.
• Weekly
Clean the Drip Tray and Grill with warm water
and a little non-abrasive washing up liquid,
rinse and dry.
REMOVE
Note: Over time it is normal for the inside
of the Drip Tray to be stained by the oils in
STEAM
the coffee grinds.
INSERT
Cleaning Warming Plate & Exterior
Wipe over the machine with a damp cloth and
wipe dry. Do not use alkaline cleaning agents,
INSERT
abrasives or metal scourers, as these will
scratch the exterior surface.
Important: Do not immerse the machine in
water.
18
PLEASE EMPTY TRAY
EM4300_20EM1(ANZ).indd 18-19
Cleaning Group Handle & Filter Basket
• Every Time
Wash after each use by rinsing them with
warm water under the tap.
• Regular Intervals
In warm soapy water using a mild detergent.
Cleaning Group Head
• Every Time
Run water through before making an
espresso. (See Operating Guide page 6-9)
• Weekly
- Purge water through by turning the DIAL to
the ONE CUP setting.
- Return DIAL when it has finished running.
- Wipe around the inside rim with a damp
cloth & brush.
Cleaning Filter Baskets
• 2-3 Months
- Soak the Filter Basket overnight in the Milk
Jug with warm water & add one Sunbeam
Cleaning Tablet.
UNSCREW
- In the morning rinse the Jug & Filter Basket
under running water ensuring all traces of
the cleaning tablet has been removed.
- Place Filter Basket into Group Handle
(without coffee) & insert into Group Head.
-Turn the DIAL to the ONE CUP setting.
Water will pour through.
- Return DIAL to the vertical position.
• Unblocking Filter Baskets
If the Dual Wall Filter Basket becomes
clogged with coffee grinds:
- Insert the 'Filter' Cleaning Pin in the
exit hole. (Cleaning Pin located in the
'Accessories' storage area under the Drip
Tray).
UNSCREW
STEAM
Care & Cleaning INSERT
INSERT
STEAM
INSERT
INSERT
- Place Filter Basket into Group Handle
(without coffee) & insert into Group Head.
PLEASE EMPTY TRAY
- Turn the DIAL to the ONE CUP setting.
Water will pour through.
- Return DIAL when finished.
- Repeat if needed.
REMOVE
Cleaning Steam Wand
PLEASE EMPTY TRAY
• Every time
- After texturing milk purge the Steam Wand
by turning the DIAL to HOT WATER for just
1-2 secs.
- Wipe the Steam Wand with a damp cloth.
REMOVE
(See Operating Guide page 9)
• 2-3 Months
- Soak the Steam Wand overnight in the Milk
Jug with warm water & add one Sunbeam
Cleaning Tablet.
- In the morning remove the Jug & rinse
ensuring that all traces of the solution have
been removed.
- Wipe Steam Wand & Tip with a damp cloth
ensuring that all traces of the cleaning tablet
have been removed.
- Run Hot Water through the Steam Wand for
40 secs.
• Unblocking Steam Wand
- Insert the 'Steam' Cleaning Pin up the
Steam Wand Tip hole. (Cleaning Pin located in
the 'Accessories' storage area under the Drip
Tray). STEAM
INSERT
- Run Hot Water through the Steam Wand.
INSERT
STEAM
INSERT
UNSCREW
• Steam Wand Remains Blocked:
- Unscrew the Steam Wand Tip & soak
INSERT
overnight in the Milk Jug with warm water &
add one Sunbeam Cleaning Tablet.
UNSCREW
PLEASE EMPTY TRAY
- In the morning rinse the Jug & Steam Wand
Tip under running water ensuring all traces of
the cleaning tablet have been removed.
- Use the Cleaning Pin to clean the Steam Tip.
REMOVE
- Screw the Steam Wand Tip back into the
Steam Wand Arm.
- Run Hot Water through the Steam Wand for
40 secs.
Group Head Rubber Seal
A rubber seal is located in the Group Head
and creates a seal against the Filter Basket
when making an espresso.
Important: When your espresso machine
is not being used, we recommend that you
do not leave the Group Handle inserted
into the Group Head, as this will reduce
the life of the seal.
Over time this seal loses its elasticity and
may require replacement. The seal may
need replacing when watery espresso leaks
from around the Group Head, or if the Group
Handle feels loose when fully rotated to the
centre position.
Note: Contact Sunbeam should you think
that the Group Head seal needs replacing.
Do not attempt to change the seal without
first consulting Sunbeam.
2/18/20 3:49 PM
U
19