7. Recovering Back to Default Configuration
IP Address has been changed or admin password has been
forgotten -
To reset the IP address to the default IP address "192.168.0.100"
or reset the login username and password to default value, press
the hardware-based reset button on the bottom panel for about 5
seconds. After the device is rebooted, you can log in the management
Web interface within the same subnet of 192.168.0.xx and default
password. Be noted that all the previous setups will be disappeared
after the factory default reset is made.
Figure7-1: ICS-2100T/ICS-2105AT Hardware-based Reset Button
Figure7-2: ICS-2200T/ICS-2400T Hardware-based Reset Button
PWR1 PWR2 Fault
Reset
LNK/
Rx
Tx
ACT
10/100TX
Buzzer Reset
System Reset
PWR1 PWR2 Fault
Reset
LNK/
Rx
Tx
ACT
100FX
SFP
15