16. Remove the shutter holder.
Unbend the part in the C-FRAME which is securing the shutter holder.
C-FRAME assy
Shutter holder
Shutter key
Assembly Precautions:
1 While paying attention to the direction of the power key, set it onto the shutter holder.
Positioning pins
Shutter holder
Power key
2 Set the shutter holder onto the C-FRAME.
Positioning pins
Hooks
3 Bend the part in the C-FRAME to secure the shutter holder.
Attention
Note: Do not to bend the part in the C-FRAME too much.
It should not go beyond the blue line in the figure.
— 24 —