Table of Contents
Advertisement
20 Controls
LED COLORS / Assembly
IQ-Touch
TM
A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
fast freeze
Activates a faster rate for freezing food.
fast ice
Increases the production of ice
energy saver Keep this switch set on energy saver (light on) for lowest energy
usage. If moisture appears on the cabinet between the doors,
pressing this button will turn the light off and enable an electric
heater used to reduce moisture on the cabinet between the doors.
water filter Press and hold for three seconds to reset after filter change.
air filter
Filter condition status is always displayed when door is open.
Press and hold for three seconds to reset after filter change.
temp mode Touch to toggle display from Fahrenheit to Celsius.
mute sounds Tones emitted by each key press can be turned off based on
user preference. The sounds are muted when the red indicator
is lit. Warning signals will stay active.
default settings Resets all refrigerator settings such as temp, temp display and
tones to their factory default settings.
on off
Press and hold for three seconds to turn off the cooling
system to clean the refrigerator. The temperature displays will
read OFF.
IMPORTANT
Pressing the system on/off icon does not turn off power to your
refrigerator. You must unplug the power cord from the wall outlet.
Setting cooling temperatures
Press the + or – indicator to adjust the temperature to the
desired setting.
The temperature display will begin to blink with the first touch. The
display will time out after 10 seconds and return to the basic display.
Alarms
Door Ajar
If the door has been left open for an extended period of time, an
alarm will sound and the door ajar indicator will display on the bot-
tom display of the control panel. The alarm is turned off by closing
the door. The mute sounds key will blink to prompt the reset of any
active alarms. Press this key to reset any system alarms.
High Temp
In the event of a high temperature condition, the temperature
display will blink and display "HI". After 20 minutes, the alarm
will sound and the high temp indicator will be red on the bottom
of the control panel. The mute sounds icon will illuminate until
pressed, acknowledging the alarm, at which time the highest
temperature reached will be displayed and the refrigerator will
resume normal operation. In case the high temp alarm is not
acknowledged at the first alarm sound time out, when the door
is first opened, the alarm sound will be repeated.
Power Fail
In the event of a power failure, the power fail alert will be
displayed and the temperature display will blink until the mute
sounds icon is pressed, acknowledging the alarm. Other modes
may be turned off until the alarm is acknowledged. The power
fail alert is turned off and the refrigerator will resume normal
operation. The high temp alarm may also be illuminated until a
safe operating range temperature has been reached.
Advertisement
Table of Contents
