Panasonic INVERTER NN-GT46KB Operating Instructions Manual page 32

Auto Sensor Programs
Program
1. Chilled
Meal
1 press
2. Frozen
Meal
2 presses
30
EN
Weight
To reheat a fresh pre-cooked meal or casserole.
All foods must be pre-cooked. Foods should be at
refrigerator temperature approx. +5 °C. Reheat in
container as purchased. This program is not suitable
for bowl shaped containers. Pierce covering film with
a sharp knife once in the centre and four times around
200 g -
the edge. If transferring food to dish, cover with pierced
1000 g
cling film. Press Sensor Reheat pad once then press
Start. Stir at beeps. Stir again at end of program and
allow a few minutes standing time. Large pieces of
meat/fish in a thin sauce may require longer cooking.
This program is not suitable for starchy food such as
rice, noodles or potatoes.
To reheat a frozen pre-cooked meal or casserole; All
foods must be pre-cooked and frozen (-18 °C); Reheat
in container as purchased. This program is not suitable
for bowl shaped containers. Pierce covering film with
a sharp knife once in the centre and four times around
200 g -
the edge. If transferring food to dish, cover with pierced
1000 g
cling film. Press Sensor Reheat pad twice then press
Start. Stir at beeps and cut the blocks into pieces.
Stir again at end of program and allow a few minutes
standing time. Check temperature and cook further
minutes if necessary before eating. This program is not
suitable for portionable frozen foods.
Instructions