Insignia Roku TV NS-43DR710CA17 User Manual page 60

NS-43DR710NA17 / NS-43DR710CA17
NS-50DR710NA17 / NS-50DR710CA17 / NS-55DR710NA17
To connect your TV to the restricted network:
1 Either during Guided Setup or after using the Settings > Network menu to set up a new connection, your TV
automatically detects that you are connecting to a restricted network and displays the following prompt:
Tip
Your TV can connect to a restricted network only if Device connect is enabled in
Settings > System > Advanced system settings. (Device connect is enabled by
default, but if you have disabled it, your TV cannot complete the connection.)
Note
Device connect is not present if your TV is in non-connected mode.
2 After selecting the correct network, highlight I am at a hotel or college dorm, and then press OK. Your TV prompts
you to use your smartphone, tablet, or laptop to complete the connection.
3 Use a phone, tablet, or wireless-enabled computer to detect wireless networks. In most cases, you can simply open
the device's Wi-Fi Settings or Network Settings screen to start scanning.
Note
The phone, tablet, or computer must be on the same wireless network to which you
are connecting your TV.
4 Connect to the network named on your TV screen. The actual network name varies.
Note
The previous step connects your smartphone, tablet, or computer directly to your TV.
No connection charges apply and the connection does not impact your device's data
plan.
5 The wireless connection process prompts you for a password. Enter the password as shown on your TV screen. The
actual password varies.
60 www.insigniaproducts.com