Table of Contents
Advertisement
Setting the clock
Press the Power button
The power is turned on.
If the language select screen is not displayed,
proceed to step
.
Press [MENU/SET] while the
message is displayed
Press ▲▼ to select the language,
and press [MENU/SET]
Press [MENU/SET]
Press ◄► to select the items (year, month, day, hour, minute,
display order or time display format), and press ▲▼ to set
Select the
setting
item
Change
the values
Select the display order for the day, month, and year
and
([M/D/Y], [D/M/Y], or [Y/M/D]).
settings
• To cancel → Press [
/
].
Press [MENU/SET]
Confirm the setting and press [MENU/SET]
• To return to the previous screen, press [
• Turn on power again and check time display.
(Time and date can be displayed by pressing ▼ several times.)
16
VQT3E49
Power button
[MENU/SET]
Select either [24hrs] or [AM/PM]
for the time display format.
/
].
The clock is not set when the camera is shipped.
To change time setting
Select [Clock Set] from [Setup] or [Rec] menu, perform
• Clock settings will be saved for approx. 3 months even after battery is removed,
provided a fully-charged battery was installed in the camera for 24 hours
beforehand.
●
Failure to set the date and time will cause the date/time to be improperly printed when
printing pictures at a digital photo centre or when using [Date Stamp].
●
After the time has been set, the date can be printed correctly even if the date is not
displayed on the camera screen.
and
.
17
VQT3E49
Advertisement
Table of Contents
