2
Panel plate
screw)
7) Disconnect the fan motor
connectors FAN1(3p,white) and
FAN2(3p,white) from DC motor
driver board.
8) Remove the fan motor after
unfastening fixing screws.
How to remove the panel plate.
1) Remove big handle.(2
screws) and water
collector(2 screws)
2) Remove two screws of
terminal board and seven
screws of right-rear panel,
and remove the right-rear
panel.
Screws of
right-rear panel
174
⑧
Screws
of big
handle
Screws of
Water collector
⑥
⑦