3
Remove
the PCB
4) Remove the
installation
plate of electric
parts
5) Remove the
fixing board of
electronic
control box
6) Disconnect the
DC motor wire,
2 louver motor
wires,
evaporator coil
temperature
sensor(T2) wire,
and two
grounding wire
(yellow-green)
to remove the
electronic
control box
1) Take out the
electronic
control box
from the body
and remove its
cover
Louver motor connector
T2
Screws of the grounding wire
Louver motor connector
DC motor connector
Repeat the operation of step1~ step6 of No2.
128