Editing Features; 8-Scene Editor - Go-Video DDV9556 User Manual

8-Scene Editor

There are two ways to edit
movies with the Dual-Deck
VCR:
1. You can use the 8-Scene
Editor to automatically as-
semble up to 8 scenes by
marking their beginning and
ending points; see instructions
at right.
2. You can use the Sync Edit
feature, which allows you to
manually cut unwanted scenes
while copying a tape; see page
74.
1
Insert Source Tape
Put the tape with your unedited source
material in Deck 1.
2
Insert Target Tape
Put your blank tape in Deck 2. To ensure
quality edits, it is best to record on blank or
pre-formatted tapes. Tip: You can pre-
format your tapes by recording the line
input over the entire tape with no signal.
3
Review Source Tape
Make a list of the scenes you wish to use in
your final movie with their beginning and
ending tape counter positions. Reorder the
scenes if desired.
4
Open "Main Menu"
Press Menu.

10 - Editing Features

Hi-Fi Deck
Power
Stop / Eject Pause Rewind Play F. Forward
Hi-Fi Deck
Power
Stop / Eject Pause Rewind Play F. Forward
(optional)
MENU
/
DECK1
Hi-Fi Deck
Record Deck Select
Hi-Fi Deck
Record Deck Select
MAIN MENU
1 EZ Copy
2 : Child Lock
3 : Timer Recording
4 : 8-Scene Edit List
5 : Setup Titler Message
6 : Language/Langue/Idioma
/ To Move
MENU to Quit
Hold MENU Key For Setup
DECK2
10 - EDITING FEATURES
Copy Tape
Copy Tape
On
Off
To Select
71