Page 1
Portable UHF Wireless System Item ref: 171.920UK, 171.921UK, 171.922UK, 171.923UK User Manual Version 1.1...
Page 2
Damage caused by misuse is not covered by the warranty Introduction Thank you for choosing this Chord UP2 portable UHF wireless system. The UP2 system is designed to offer a flexible wireless platform for performance and communication applications. Please read this manual before using this equipment to avoid damage through incorrect operation and to get the best performance from your purchase.
Page 3
The UP2 set (171.920UK) is supplied with a neckband microphone and over-ear headphones. Connect the neckband microphone to the 3.5mm MIC IN jack (1) on the top of the UP2-BT transmitter. Alternatively, any of the chord replacement neckband or lavalier microphones which terminate to a mono 3.5mm plug may be used.
Page 4
171.920UK + 171.923UK handheld transmitter In-ear monitoring 171.920UK + 171.894UK in-ear monitor headphones Tour guide or silent disco 171.920UK + multiple 171.921UK receivers Presenter to broadcast camera 171.920UK + 171.967UK discreet lavalier microphone 171.920UK + 171.922UK transmitter Conference with 2-language translation + multiple 171.921UK receivers...
Page 5
Frequency selection The UP2 system has 2 selectable UHF carrier frequencies, which can be used at the same time. However, any transmitter or receiver can only operate on one frequency at a time. Where there is only one speech or audio signal, the selectable channels are only needed if there is interference on one of the carrier frequencies.
Need help?
Do you have a question about the 171.921UK and is the answer not in the manual?
Questions and answers