Send Own Caller Id With Next Call; Settings - Nokia Phase A 6180i User Manual

Send own caller ID with next call

In most service areas, when you call someone, their caller
ID system allows them to see your name and phone
number. Your phone is set to automatically allow this
information to be seen. Before you make a call, you can
choose to prevent this information from being seen. This
is sometimes referred to as "blocking caller ID".
Warning: While roaming, you may not be able to block caller ID.
Note: Before you can activate this feature, you should first store
the feature code given to you by your service provider.
Otherwise, this feature may not appear in the menu or
function properly. Check with your service provider to
confirm if the feature code has been pre-programmed for
you. See "Network feature setting" on page 61 for more
details.
This feature works on a per-call basis, so you must
perform this procedure before each call that you make in
order to block caller ID for that call.
Press Menu 4-4-4 (Settings - Network services -
1.
Send own caller ID with next call)
Highlight Yes (to show your number) or No (to not
2.
show it) and press OK
Enter the number you wish to call (or press Search
3.
to retrieve the number from the phone book), then
press OK. Press OK again.
Your phone will attempt to call this number with the
4.
feature code you stored in Menu 4-4-5 (
feature setting" on page 61

Settings

This main menu allows you access to other features.
See these individual entries for more information.
4-1 Call settings -
See page 30
4-2 Phone settings -
See page 68
4-3 Security settings -
4-4 Network services -
77
6180i Phase A
11/6/00 2:00pm
see "Network
)
.
.
.
See page 75
.
See page 62