Network Feature Setting - Nokia Phase A 6180i User Manual

activating the phone.
If this happens, select the appropriate selection for your
phone. If you don't want your service provider to change
your lock code, select Lock. If you want to allow your
service provider to change your code to prevent other
service providers from activating your phone, press Unlock.
If you wish to do neither and want to return to the start
screen, press and hold
Note: This feature may not be available in all systems. Please
contact your service provider for details about the
availability of this feature.

Network feature setting

Call forwarding ( ), Call waiting (
page 28
Send own caller ID with next call (
services available through your service provider or dealer.
When you subscribe to any of these services, your service
provider or dealer gives you a separate feature code to
activate each service. Deactivation codes are used to
deactivate each service.
Once you store the appropriate code in your phone, the
service appears as a menu item. You can then use the
menu to activate and deactivate these services.
Note: These feature codes may already be stored in your phone by
your service provider. Check with your service provider to
confirm if these codes are already configured in your
phone.
Note: If your phone has more than one phone number
programmed, any feature codes stored will apply only to
your primary phone number, or NAM 1.
Storing feature codes
Press Menu 4-4-5 (Settings - Network services -
1.
Network feature setting)
At Feature code:, enter the feature code or deacti-
2.
vation code received from your dealer (for example,
∗ 74 or ∗ 740), press OK
61
6180i Phase A
11/6/00 2:00pm
.
) and
page 31
) are network
page 77