Note
b The charge between using a data
plan to access the internet and using
Wi-Fi is different. Please contact
your network operator for further
information.
Wi-Fi
1. From the Today screen, select Start >
Settings > Connections > Wireless
Manager.
2. To turn on, highlight the Wi-Fi bar, then
press the Enter key.
3. Select Menu > Wi-Fi Settings and press
the Enter key.
4. If Wi-Fi connection is established, you can
see the connection name (SSID) in the
Wireless Manager.
4. Select the desired SSID.
5. When finished, select Connect.
6. To turn off Wi-Fi, select Wi-Fi in the
Wireless Manager again.
Note
b If your Wi-Fi service provider or
network administrator sets WEP
encryption for network security, you
should fill in WEP key in the pop-up
window. If WEP encryption is not set,
this pop-up window is not shown.If
you don't know the key, you need to
ask it to your Wi-Fi service provider or
network administrator.
Configuring Wi-Fi Connection Settings
Note
b Before you set the WLAN
configuration, you need to ask your
WLAN service provider or your
network administrator for the IP
settings.
Settings
83