Polygroup TG76P3961C04 Assembly Instructions

NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from
Carefully follow the instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface.
Fig. A - Tree pot Assembly
Fig. B - Tree and Light Assembly
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap before inserting into the
assembled pot. Make sure the pole is firmly inserted and secured into the pot.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of branch hinges.
7. Connect the light strings as per the color labels indicated in (See Fig. B) and insert green label plug into the wall outlet. Your entire tree
should now be lit. If some bulbs do not light or flicker, search for any loose plugs and/or broken, loose or missing bulbs. Replace bulbs
promptly in order to maintain the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one
to the right, one to the left and one at the center of the main stem. (See Fig. C)
1-888-919-0070
OR
Polygroup®!
Tree top
Section 3
Section 2
Section 1
(See Fig. A)
Assemble
Red Labels
Together
Assemble
Yellow Labels
Together
1
TREE# : F36
MODEL # :
SKU # : 124304159
*Electrical Rating For The Tree
(For Indoor Use Only)
1.7A 120V 60Hz
Assemble
Blue Labels
Together
Insert
Green Label
Plug Into Wall
Outlet
TG76P3961C04