Asus REPUBLIC OF GAMERS ROG Phone II User Manual page 13

Charging your ROG Phone
Your ROG Phone comes partially charged but you must charge it fully before using it for the first
time. Read the following important notices and cautions before charging your device.
IMPORTANT!
• Peel off the protective film on the AC power adapter and USB Type-C cable before using it with your
device.
• Ensure to plug the AC power adapter to a compatible power outlet. You can plug the AC power
adapter to any compatible 100~240 V outlet.
• The output voltage of the AC power adapter for this device is +5V-10V 3A, 30W (for ASUS_I001D/
ASUS_I001DC), +9V 2A, 18W (for ASUS_I001DD/ ASUS_I001DE).
• When using your ROG Phone while plugged-in to a power outlet, the power outlet must be near
your device and easily accessible.
• To conserve electricity, unplug the AC power adapter from the power outlet when not in use.
• Do not place heavy objects on top of your ROG Phone.
CAUTION!
• While charging, your ROG Phone can become warm. This is normal, however, if your device
becomes unusually hot, disconnect the USB Type-C cable from your device and send the device,
including the AC power adapter and cable to an ASUS-qualified service personnel.
• To prevent any damage to your ROG Phone, AC adapter, or USB Type-C cable. Ensure that the USB
Type-C cable, AC adapter, and your device are connected properly before charging.
To charge your ROG Phone:
1. Connect the USB Type-C cable to the power adapter.
2. Connect the USB Type-C cable to your ROG Phone.
3. Plug the AC power adapter to a grounded power outlet.
3
1
2
Chapter 1: Basics 13