Table of Contents
Advertisement
Reach-In Freezer Service Manual
C
P
LEANING AND
Weekly or sooner, as required:
1.
Disconnect the power source before cleaning. Remove all products and place in a proper cooler.
2.
Clean the interior and exterior with a mild soap or detergent solution and then rinse with a warm
baking soda solution (one cup of baking soda to one gallon of warm water). Dry the interior
completely before replacing products.
3.
Clean the condenser unit periodically by vacuuming the unit compartment, especially the
condenser unit coil (it looks like a small auto radiator). If the condenser coil has accumulated dirt
and grease (possible in heavy traffic areas or a kitchen), use a strong cleaning solution. If you find
any oil in the condensing unit compartment, call a qualified service person immediately.
4.
Empty out and clean drain pan located next to the condensing unit as required. Check regularly for
excessive water accumulation.
5.
Plug in the cabinet and wait until the proper temperature is achieved before reloading the cabinet
with product.
Publication Number: 630460260SER
M
REVENTIVE
AINTENANCE
FIGURE 2
- 2 -
© 2004, IMI Cornelius Inc.
Advertisement
Table of Contents
