Packing Contents; Fitting The Wheels - Ryobi RC-2050NV Owner's Operating Manual

CAUTION. This packaging contains
sharp objects. Take care when
unpacking. Remove the machine,
together with the accessories supplied, from the
packaging. Check carefully to ensure that the
machine is in good condition and account for all the
accessories listed in this manual. Also make sure
that all the accessories are complete.
If any parts are found to be missing, the machine
and its accessories should be returned together in
their original packaging to the retailer. Do not throw

PACKING CONTENTS

• Direct drive compressor
• Wheels x 2
• Wheel fixings (bolt, nut) x 2
• Rubber foot
• Rubber foot fixings (bolt, washer, nut) x 2
• Operator's Manual
WARNING. If any parts are damaged or
missing, do not operate this product until
the parts are replaced. Use of this
product with damaged or missing parts
could result in serious personal injury.
WARNING. Do not connect to power
supply until assembly is complete.
Failure to comply could result in
accidental starting and possible serious
personal injury.
WARNING. Do not attempt to modify this
product or create accessories not
recommended for use with this product.
Any such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious
personal injury.

FITTING THE WHEELS

Fit the two transportation wheels to either side of
the compressor as shown in Fig.1 using two
spanners (not supplied).
FITTING THE RUBBER FOOT
To fit the rubber foot, place a washer onto the bolt
and locate the bolt through one of the holes in the
rubber foot and hole on the compressor support
bracket (Fig.2). Tighten the nut with a spanner or
socket (not provided).
UNPACKING
the packaging away, keep it safe throughout the
guarantee period, then recycle if possible,
otherwise dispose of it by the proper means. Do
not let children play with empty plastic bags due to
the risk of suffocation.
Take care when lifting the compressor from the
packaging.
ASSEMBLY
Repeat the process for the second bolt and secure
the rubber foot into position.
7
CAUTION. Do not lift the compressor by
the pressure regulator. Get assistance if
necessary. This unit weighs 22.2kg.
Bolt
Nut
Fig. 1
Nut
Fig. 2
Wheel
Bolt
Washer