Table of Contents
Advertisement
Help Guide
Wireless Speaker
SRS-XB40
Listening to music wirelessly with two speakers (Speaker Add function)
By connecting two SRS-XB40 speakers via BLUETOOTH, you can select audio reproduction between stereo mode (stereo sound)
and double mode (monaural sound). To use this function, two SRS-XB40 speakers are required.
Select from the following two playback methods.
Double mode
Both speakers play the same sound. Double mode is the initial setting.
Stereo mode
One speaker plays the sound on the right channel (right side), while the other speaker plays the sound on the left channel (left
side) for stereo playback between the speakers.
Note
Turn off both speakers before setting up the Speaker Add function.
Set up the first speaker.
1
1.
Press the
(power)
The
(BLUETOOTH) indicator begins to flash in white.
2.
Press and hold the ADD button for about 3 seconds until a beep is heard.
The
(BLUETOOTH) and L/R indicators flash in white. After about 3 seconds a beep will be heard and the L/R
indicators light up.
The
(BLUETOOTH) indicator keeps flashing.
PAIRING button on one of the speakers to turn it on.
64
Advertisement
Table of Contents
