Listening To Music Wirelessly With 2 Speakers (Stereo Pair Function) - Sony SRS-XB43 Help Manual

Help Guide
Wireless Speaker
SRS-XB43

Listening to music wirelessly with 2 speakers (Stereo Pair function)

To use the Stereo Pair function, 2 SRS-XB43 speakers are required. By connecting 2 speakers via BLUETOOTH
connection, you can enjoy more powerful sound.
One speaker plays the sound on the right channel (right side), while the other speaker plays the sound on the left
channel (left side) for stereo playback between the speakers.
For Apple iOS devices, the unit is compatible with iOS 10.0 or later. A BLUETOOTH connection is not available on the
devices with iOS 9.x or earlier.
Note
With "Sony | Music Center," you cannot establish or disconnect connections for wireless playback with the Stereo Pair function.
Before establishing a connection between the speaker and a BLUETOOTH device, turn down the volume of the speaker and the
device or stop music playback on the device to avoid any sudden loud sound output from the speaker.
Place 2 speakers within 1 m (3.2 ft) each other, and then turn on both speakers.
1
The (power) indicator lights up.
The (BLUETOOTH) indicator flashes slowly.
If the BLUETOOTH device which has been connected before is nearby, the speaker may be connected to the
device automatically, and then the
function on the BLUETOOTH device or turn off the BLUETOOTH device.
When the speaker has no pairing information, for example when you use the BLUETOOTH function for the first time
after purchase, the
Press the ST PAIR (Stereo Pair) button behind the cap on the rear side of one of the 2 speakers.
2
You hear a beep and the
seconds, the ST PAIR (Stereo Pair) indicator will stop flashing and stay lit with a beep.
(BLUETOOTH) indicator may be lit. In this case, turn off the BLUETOOTH
(BLUETOOTH) indicator keeps double flashing in blue.
(BLUETOOTH) indicator and the ST PAIR (Stereo Pair) indicator flash. In about 6
46